Kreg DK1100 Pro Series Fully Automatic Pocket Hole Machines

Order Line
978-562-5575
Mon-Fri 9:00-5:30
eastern time zone

(SCROLL DOWN TO ORDER)

The fully-automatic DK1100 Series pocket boring machines are built to perform day after day in harsh production environments. Choose from three models all built with the same rugged chassis and reliable one-step drilling operation.

All three models feature...

Kreg machines drill the pocket hole with a 3/8" diameter step bit in one

smooth operation. The bit is supported to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent hole placement whether the material is oak, maple, hickory, MDF, melamine or veneered plywoods.

The flat step of the drill bit ensures that the bottom of the pocket hole is

perfectly flat so the screw head will seat flushly in the base of the pocket. Our drilling operation not only produces a much smaller hole than the routed hole shown at right, but also a round-sided hole that enables it to be plugged and concealed with a solid wood dowel if desired.

Operator comfort is maximized by the extremely quiet operation of all three of our electric or air powered machines.

Change drill bits easily with the convenient swing-top access of the DK1100 Series as shown at right.

Choose from three models to customize to your shop setup. Air or electric powered, benchtop or floor-standing cabinet, all with the same industrial performance.

The Great Angle Debate...

As shown in the image at right, Kreg's 15 degree drilling method

and the 6 degree routing method of producing a pocket hole differ in the angle of attack. One advantage of the 15 degree angle is that the driver is always in perfect alignment with the screw head while driving the screw, while the 6 degree angle can run into clearance problems.

Another aspect relating to the angle of attack is joint shift, or the tendency of the workpieces to shift out of alignment while driving a screw. In softer materials, workpieces can often be assembled by simply holding the pieces in alignment by hand. In harder materials such as oak and maple, Kreg promotes eliminating joint shift altogether by placing a quick clamp set across the joint line to safely and consistently produce perfectly flush joints. Kreg manufactures inexpensive and easy-to-use clamps and/or framing tables for this purpose. All prominent manufacturers of this type of machine also realize the benefits of clamping as they all offer a clamping solution to address this situation.


		Kreg DK1100FE Fully Automatic Floor Standing Electric Pocket Hole Machine Sold Freight Paid in Lower 48 KTC-DK1100FE-X


		Kreg DK1100FP Fully Automatic Floor Standing Pneumatic Pocket Hole Machine Sold Freight Paid in Lower 48 KTC-DK1100FP-X


		Kreg DK1100TP Fully Automatic Table Top Pneumatic Pocket Hole Machine Sold Freight Paid in Lower 48 KTC-DK1100TP-X

power tools, woodworking tools, chainsaws, saw blades, router bits, dado blades

Order Line: 978-562-5575

If you are unfamiliar with ordering online, please go to the Help section, at the left.

right-tool.com specializes in high quality and high value tools designed for specific jobs. We focus on the needs of Contractors, Craftsmen, and Professional Woodworkers. Whether it's woodworking making precision cuts, dado blades, applying quality finishes, working in tight spaces, handling special materials for woodworking, home improvement, cutting timber with chainsaws, or gardening right-tool.com has tools to reduce labor, save time, and get the job done right.

We offer online, and in our store, high quality woodworking and power tools from: RotoZip Spiral Saw, Freud Router Bits, Saw Blades, and Dado Blades, Eze-Lap Diamond Sharpeners, Chain Saw Products, Grandberg Chainsaw Mills, Love-Less Ash Vacuums, Prazi Beam Cutters, cainsaws, Gyros Miniature Saws,Freeborn Shaper Cutters, Beaver Air Tools, Taunton Press books, and accessories for DeWalt, Delta, and Porter Cable power tools.